Temperature --
FlexSmart Temperature Sensor Information
[51kb
 ]
Relative Humidity (RH) --
FlexSmart Humidity Sensor Information
[6kb
]
Air/Water Pressure (Gage Pressure) -- Silicon strain pressure transducer, stainless steel construction for use with water or other compatible fluids. Accuracy is plus/minus 1 percent of range. The FlexSmart Analog Imput Module is required for measurements.
FlexSmart Pressure Transducer Information
[24kb
]
Electric Current
AC Current Probes — Split Core - opening style (split core) current transducers (CTs) with internal burden resistor. Provides safe, 333 mV AC output proportional to current. Accuracy is plus/minus one percent from 10 to 100 percent of rated current. The FlexSmart TRMS Module is required for current measurements.
AC Current Probes — Clamp On - AC current probes with 333 mV full-scale outputs can be used in place of split-core current transducers. Clamp-on probes also use the FlexSmart TRMS Module for input to the HOBO logger.
FlexSmart Current Transformer Information
[173kb
]
|
| Electrical Power -- AC WattHour Transducers (WattNode™) use industry-standard 333 mV toroidal or split-core CTS with burden resistors for safe and easy installation. Accurate within .045 percent of reading plus .05 percent of full-scale excluding CT accuracy. Range is 0.1 percent to 150 percent of full scale. Accuracy is reduced at inputs greater than 100 percent.
FlexSmart WattHour Transducer Information
[37kb
]
Test lead sets are available for use with the WattHour Transducer: both delta and wye configurations. The FlexSmart Pulse Input Adapter is required for AC WattHour Transducer.
Voltage -- AC Potential Transformers (PTs) are used to measure voltage in 50/60 Hertz AC electrical systems. Precision step-down transformer provides electrical isolation and a safe 333 mV AC full-scale output signal proportional to the high voltage input. Accuracy is plus/minus one percent from 0 to 100 percent of rated voltage. The FlexSmart TRMS Module is required for voltage measurements.
FlexSmart Potential Transformer Information
[42kb
]
General Signal Measurement -- The FlexSmart Analog Input Module is available for general signal measurement: 4 to 20 mA, 10v DC voltage measurement module, 5v DC voltage measurement and 20 mA DC current measurement.
Other Sensors -- Other ranges and types of sensors may be ordered to meet your specific monitoring needs. Please
contact us
[launch  ]
regarding specific sensor information. |
